The Loop conveyor scale has two knife edge, each end of the fulcrum axis, and the inlet and outlet of the loop conveyor are located near these knife edge.
Thus, only the weight of powder and granule passing through the left can be detected by the load cell. From the detected weight and the revolution speed, the flow rate of the powders is calculated and the flow rate signal is emitted accordingly.
Loop conveyor is bilateral-symmetrical construction. The fixed passing route is scraped by impeller so tare weight is always balanced. And also it can detect only powder weight on the left half continuously without zero point shifts.
FEATURES
1. The special soft-flexible-sealing structure assures trouble-free operation against abrasive wear, temperature change, and powder flushing.
2. Highly accurate volumetric feeding can be achieved.
3. The Perfect seals provided for the bearings prevents any infiltration of powder.
4. Free from powder leakage and dust generation.
Capacity and type
|
TYPE |
MAX.CAPACITY(m3/h) |
|
LS-Q-GP(SP) |
3 |
|
LS-QS-GP(SP) |
6 |
|
LS-E-GP(SP) |
8 |
|
LS-ES-GP(SP) |
9 |
|
LS-K-GP(SP) |
16 |
|
LS-KS-GP(SP) |
23 |
|
LS-KS1-GP(SP) |
30 |
|
LS-R-GP(SP) |
48 |
|
LS-RS-GP(SP) |
71 |
|
LS-M-GP(SP) |
96 |
|
LS-MS-GP(SP) |
134 |
Bulk Density:±0.5%
